MakerBot Replicator Z18, Руководство пользователя

Страница: 23 / 66

GETTING STARTED 23
4a. The build plate on the MakerBot
Replicator Z18 has two parts: a removable
plastic top plate, and a flat, sturdy
aluminum base. Turn the latches on the
front of the build platform and slide the
top plate forward to release it. Then lift the
top plate out of the MakerBot Replicator Z18.
4b. Peel the backing off of the sheet of
build plate tape and lay the tape flat on the
top plate, with the sticky side facing down.
4c. Smooth down the build plate tape so
that it is stuck securely to all parts of the
top plate.
4d. Fit the top plate onto the projections
on the aluminum base and slide it back
to snap it into place. Turn the build plate
latches to secure the plate.
4 APPLY BUILD PLATE TAPE
SETTING UP THE MAKERBOT REPLICATOR Z18