Keys
1.Function keys
2.Power switch
3.Feed keys
Lights
4.Power indicator
5..Alarm indication
6.Bluetooth indicator
Interface
7..RJ11 Interface
8..Power input interface
9.MiniUSB interface
10.Hook
Other
Line appearance, beautiful small, handheld comfortable, can hang bosom,
can desk work
Easy to install paper and easy to use
Can support 50mm diameter paper roll
2400mA / 7.2 V rechargeable 18650 lithium battery, which adopts imported
electric core and long cycle life
Printing while charging
Use low power machine core, printing time is longer, printing effect is better
USB + bluetooth interface (matching)
Bluetooth supports BT3.0 and BLE4.0, which can be connected to android
and apple
USB is the default USB Printing Support mode for development and testing
ESC/POS Command
Gb18030 simplified
4 5
6
7 8
1 2 3
9
10
Portable thermal printers
Easy to install paper and easy to use
Can support 50mm diameter paper roll
Open the flap in the
direction of the arrow
Step 1
Put the paper in the
direction of the arrow
Step 2
Close the cover of the
paper
Step 3
Thank you for your patronage
Check the parts:
Know the printer
Equipment Status
Open the sashbox without external power supply
Open the cash box function
Rj11 Interface
sash box
01
02
Portable thermal printers
Turn o n state:
long press "switch" key 2 seconds, blue
light, buzzer the short sound, the blue light always flicker.
Lo w electricity rem ind:
blue light keeps on.
Lo w po wer turn of f :
the indicator is all out, the buzzer is
short.
B lueto o th co nnectio n:
bluetooth flicker when the
machine is switched on (interval 2 seconds).
A bsence of paper warning:
the middle red light is always
bright, with intermittent short singing.
O verheating warning:
the middle red light is always
bright, accompanied by the intermittent chirping (this
feature is a reminder of the overheating protection of the
customer's heat thermal printing head).
Turn o n charge:
the device can turn on charging, the
POWER red light when charging, turn green after filling.
Turn of f charge:
the device can turn off charging, the
POWER red light is always bright when charging, turn
green when full.
Print Method:thermal
Print Width:48mm(Effective Width)
Print Density:384Dot/Line
Printing Speed: Up to 60mm/SEC
Interface:USB + Bluetooth
Paper Width: 58mm
Paper Roll Diameter: 50mm
Paper Thickness: 0.06 ~ 0.08 mm
Print Command: ESC/POS
Character Size: Simplified Chinese: 24X24dot
Bar code type:CODE39,CODE128 EAN-13
The input buffer:25K bytes
Power adapter: input: AC220V output: DC9V / 2A
Lithium Battery: 2400mAh / 7.2 V
Charge Time: 30-40 minutes
Working Conditions: Temperature: 0
℃
to 50
℃,
Humidity: 20% ~ 85%
Storage Conditions:Temperature: - 20
℃ ~
60
℃,
Humidity: 5% ~ 95%
Mechanical Properties: 50 km
O perating system :
Android,iOS,(Win9X/Win ME/Win2000/WinNT/WinXP,
WinVista,Win7,Win8,Linux)
Printer Parameters
Right
Wrong
Installation of paper roll
Instructions 1 Warranty card/certificate 1 Printer 1 Adapter 1
Notice when using:
Don't touch the printer to tear the paper knife.
The thermal print head is a heating component. When the printing process or
printing is finished, do not touch the thermal print head and the surrounding
area.
Do not touch the thermal print head and connection plug-in, otherwise the
printer may not work properly.
In order to protect the quality of printing and extend the life of the product, it is
recommended to use the recommended or equivalent quality of thermal printer
paper.
Printers must not be printed without paper, otherwise the printing of rubber
roller and thermal print head will be seriously damaged.
When the wire is plugged, make sure that the printer power is off.
To avoid water or conductive material (e.g. metal) inside the printer, turn off the
power immediately.
Printer before charging after use battery recharging as far as possible, so that we
can effectively ensure the service life of the battery, battery performance will be
increased with the increase of number of charge dropped.
If you hold the printer for a long time, be sure to remove the battery from the
printer and store it alone, otherwise it may cause the battery failure, even
leakage, can damage the printer.
Please use this manual for reference.
R
Guangzhou NETUM Electronic Technology Co., Ltd.
