MakerBot Replicator Z18, Руководство пользователя

Страница: 56 / 66

TROUBLESHOOTING 56
PROBLEM SOLUTION
The Smart Extruder is installed,
but the MakerBot Replicator Z18
does not recognize it. Remove the Smart Extruder and run the extruder
attachment script by going to
Utilities > System
Tools > Attach Smart Extruder
.
A print pauses unexpectedly. Make sure the front door of the MakerBot
Replicator Z18 is closed.
When the door is opened during a print, the
print will automatically pause. When the door is
opened while a print is being initiated or during a
preheat, the print or preheat will be cancelled.
To ensure that this does not happen, make sure
the front door of the Replicator Z18 is securely
closed before beginning a print or preheat.
PRINTING PROBLEMS
If these solutions don’t solve your issue, or if you are having a problem that doesn’t appear
here, please visit makerbot.com/support.