MakerBot Replicator Z18, Руководство пользователя

Страница: 59 / 66

TROUBLESHOOTING 59
UPDATING FIRMWARE
Firmware is the software that runs on your MakerBot Replicator Z18. Keeping your firmware
up to date will help ensure that your MakerBot Replicator Z18 is in the best possible working
order. Firmware updates allow MakerBot to add new features to your MakerBot Replicator Z18
and improve old ones.
MakerBot Desktop will let you know if there’s a firmware update available. To upgrade to the
new version, just select
Upload Firmware
from the
Devices
menu. The software will walk
you through the steps to bring your MakerBot Replicator Z18 up to date.
EMPTYING THE FILAMENT WASTE BIN
At the beginning of each print, your Smart
extruder will purge some plastic into a small
container inside the MakerBot Replicator
Z18. This filament waste bin is located
in the back right corner of your MakerBot
Replicator Z18, and is held in place by a
magnet. When the filament waste bin
is full, pull it free and empty it of its
contents. Then return it to its place inside
the MakerBot Replicator Z18.