MakerBot Replicator Z18, Руководство пользователя

Страница: 9 / 66

WELCOME. 9
Caution:
The socket outlet must be located near the machine and must be
easily accessible.
Caution: In case of emergency disconnect the MakerBot Replicator Z18 from
the socket outlet.
Caution:
The MakerBot Replicator Z18 melts plastic during printing. Plastic odors
are emitted during this operation. Make sure to set up the MakerBot Replicator Z18
in a well-ventilated area.
Caution: Never remove the Smart Extruder from your MakerBot Replicator Z18 or turn
off the MakerBot Replicator Z18 during or immediately after printing. Always allow the
Smart Extruder to cool completely before removing it from the MakerBot Replicator
Z18 or turning off your 3D printer.
Caution: Do not look directly at any operating LED component.
SAFETY AND COMPLIANCE