MakerBot Replicator Z18, Руководство пользователя

Страница: 39 / 66

MAKERBOT DESKTOP 39
PRINT SETTINGS
PRINTING TO THE MAKERBOT REPLICATOR Z18
PRINTING FROM MAKERBOT DESKTOP
When you are ready to print, click
Print
to slice the model using the current settings and send
a .makerbot print file to your MakerBot Replicator Z18.
•
•
• If MakerBot Desktop is connected to your MakerBot Replicator Z18, the print file will
be sent directly to your 3D printer. Click the control panel dial to confirm and start
• your print.
• • If you are not currently connected to a MakerBot 3D printer, the Print button will be
disabled. Click
Export
to save a file to transfer to your MakerBot 3D printer via
•
a USB drive or to print at a later time.
•
• Click
Print Preview
in the Print or Export dialog after your object is sliced to open
•
a preview of the sliced model.
4. Advanced
Click Advanced for additional options, including print speed and object strength. For information
on what the advanced settings are and how to use them, go to makerbot.com/support.
If you would like to turn the heated build chamber on, use the advanced settings to create a
custom profile. Go to mbot.co/15pwxXo to see the specific custom profile settings needed to
turn the heated build chamber on.
5. Cancel
Click
Cancel
to return to the Prepare view without saving changes. Any print settings you
have selected will be discarded.
6. Save Settings
When you are finished, click Save Settings . The saved settings will be used to slice your
model next time you print or export a print file.