CWL-20E
|
5
|
en
Contents
NEVER use the manual operation procedure as a
normal operation to raise or lower a vehicle
. The
manual operation procedure is intended for use only
when the normal controls are not functioning.
NEVER use the lift system as a wheel dolly
for the
removal of tires.
Always keep the covers closed on the lift units.
Do not operate equipment with a damaged cord
or
if the equipment has been dropped or damaged –
until it has been examined by a qualified serviceman.
If an extension cord is necessary
, a cord with a
current rating equal to or more than that of the
equipment should be used. Cords rated for less
current than the equipment may overheat. Care
should be taken to arrange the cord so that it will not
be tripped over or pulled.
Adequate ventilation
should be provided in the work
area.
Keep hair, loose clothing, fingers, and all parts of
body away
from moving parts.
Use only as described
in this manual. Use only
manufacturer’s recommended attachments.
ALWAYS WEAR SAFETY GLASSES.
Everyday
eyeglasses only have impact resistant lenses, they are
NOT safety glasses.
Do not operate the lift system with air containing
excess moisture or particulate matter.
NEVER allow the lift system to be used unless all
warning labels
and instructional decals are in place
and legible.
NEVER use this jack to lower a vehicle if the
vehicle was raised using another lifting device or
devices
. The vehicle should be lowered with the
same equipment that was used to properly raise it
(read and follow the warnings and instructions for this
other equipment).
Always use caution while operating this device
and
remain mindful of how the device and load will react
during operation of this device.
Do not let cord or hose hang
over edge of table,
bench, or counter or come in contact with hot
manifolds or moving fan blades.
Never use the cord to pull the plug
from the outlet.
Grasp plug and pull to disconnect.
Failure to understand and obey this warning may
result in personal injury or death.
