Industrial Gaussmeter IGM11 Operating Instructions
Chapter 6 Set-up Menu
Page 39 / 106
MAGSYS
magne t
systeme
Version 01/2013
© 2013 MAGSYS magnet syste
me GmbH - All Rights Reserved.
6.3.7
Settings of the Digital Outputs
Settings of the digital output 1
RESET IF
Logic function
With the following function
the output will be reset.
SET IF
With the following function
the output will be set.
ALWAYS
Constant
The output will always be set
(reset).
GREATER
THAN
Relation
This output will be set if the
displayed measuring value is
greater than the comparative
value.
LESS THAN
Relation
This output will be set if the
displayed measuring value is
less than the comparative
value.
IN RANGE
Relation
This output will be set if the
displayed measuring value
lies within both comparative
values..
OUT OF
RANGE
Relation
This output will be set if the
displayed measuring value
lies beyond the range of both
comparative values
OVERFLOW
Overflow detection
This output is set if an
overflow occurred.
Snnnnnn.nnn
Operands
Input of the operand for the
GREATER THAN
relation
Snnnnnn.nnn
Operands
Input of the operand for the
LESS THAN
relation
Snnnnnn.nnn
Snnnnnn.nnn
Operands
Input of the operand for the
IN RANGE
relation
Snnnnnn.nnn
Snnnnnn.nnn
Operands
Input operand for the
OUT
OF RANGE
relation
Correspondingly, these settings hold for all four outputs. If more outputs are
furnished with the same function, these outputs are switched identically.
Trial Version
Subje
ct to chan
ge