manualshive.com logo in svg

Magnum Dimensions ME-AGS-S, Руководство пользователя, Страница: 7 / 38

Поделиться
Скачать
Magnum Dimensions ME-AGS-S Скачать руководство пользователя страница 7

1 

© 2016 Sensata Technologies

Introduction

 

1.0 Introduction

The Automatic Generator Start – Standalone version (

ME-AGS-S

) 

from Sensata is designed as a standalone device. It will automatically 

start your generator based on low battery voltage and/or a high 

temperature condition.

Info: 

See Figure 3-1 for information on how to identify your 

ME-AGS’s revision level.

Info: 

If you are using a Sensata inverter/charger (provided 

with a network port) and a ME-RC or ME-ARC remote, use 

the 

ME-AGS-N

 (AGS – Network version) for full network 

capability of the AGS system.

This AGS is used to continuously monitor your battery system and/

or the surrounding area temperature, and to automatically start the 

generator when the battery requires charging and/or power is needed 

to run an air conditioner to cool down the surrounding area.
The temperature turn-on feature is useful in many applications. For 

example, if you have an RV (recreational vehicle) coach in a hot 

environment, the AGS monitors the coach temperature and turns on 

the generator to power the air conditioner. This allows you to leave 

pets and precious items in your coach while you are away—all the 

while knowing your coach will stay cool and comfortable. Even if you 

don’t have pets, there’s nothing better than returning to a nice cool 

coach while dry camping in hot weather. Plus, no more worrying 

about dead batteries.
The AGS system includes a controller with on-board adjustments and 

interfaces, and a user-friendly remote control switch. The controller 

provides the wiring interface for the battery bank and generator 

start/stop circuits. It has adjustments for setting the generator’s 

run time, high temperature start, and low battery voltage start; 

and if needed, the 

Clock

 and 

Quiet Time

 adjustments can be set to 

comply with RV park/rest area nighttime low noise requirements. 

The remote switch allows testing and activating the AGS system, and 

provides a LED indicator to display AGS system status information.
This AGS is compatible with most AC or DC generators with 

either two-wire or three-wire start controls; such as Onan, Power 

Tech, Generac, Martin, Kohler, Honda, Westerbeke, Yamaha, and 

many others. For a list of generators that have been successfully 

used with the AGS (& their respective wiring diagrams), visit: 

www.Magnum-Dimensions.com.
The standalone AGS is equipped with the following features:
•  Compatible with 12, 24, or 48-volt systems
•  Easily adjustable settings for run-time, low voltage, and high 

temperature start

•  Quiet Time setting to prevent generator operation during 

nighttime hours

Содержание ME-AGS-S







































Отзывы:

Нет отзывов