manualshive.com logo in svg

Magnum Dimensions ME-AGS-S, Руководство пользователя, Страница: 36 / 38

Поделиться
Скачать
Magnum Dimensions ME-AGS-S Скачать руководство пользователя страница 36

© 2016 Sensata Technologies 

30

Limited Warranty

Sensata Technologies warrants the ME-AGS-S to be free from defects 

in material and workmanship that result in product failure during 

normal usage, according to the following terms and conditions:
1.  The limited warranty for the product extends for twelve (12) 

months beginning from the product’s original date of purchase.

2.  The limited warranty extends to the original purchaser of the 

product and is not assignable or transferable to any subsequent 

purchaser.

3.  During the limited warranty period, Sensata will repair, or 

replace at Sensata’s option, any defective parts, or any parts 

that will not properly operate for their intended use with factory 

new or remanufactured replacement items if such repair or 

replacement is needed because of product malfunction or failure 

during normal usage. The limited warranty does not cover 

defects in appearance, cosmetic, decorative or structural parts, 

or any non-operative parts. Sensata’s limit of liability under the 

limited warranty shall be the actual cash value of the product at 

the time the original purchaser returns the product for repair, 

determined by the price paid by the original purchaser. Sensata 

Technologies shall not be liable for any other losses or damages.

4.  Upon request from Sensata, the original purchaser must prove 

the product’s original date of purchase by a dated bill of sale, 

itemized receipt.

5.  The original purchaser shall return the product prepaid to 

Sensata Technologies. After the completion of service under this 

limited warranty, Sensata will return the product prepaid to the 

original purchaser via a Sensata-selected non-expedited surface 

freight within the contiguous United States and Canada; this 

excludes Alaska and Hawaii.

6.  If Sensata repairs or replaces a product (with either a new or 

refurbished product), its warranty continues for the remaining 

portion of the original warranty period or 90 days from the date 

of the return shipment to the original purchaser, whichever is 

greater. All replaced products and parts removed from repaired 

products become the property of Sensata Technologies.

7.  This limited warranty is voided if:

•  the product has been modi

fi

 ed without authorization

•  the serial number has been altered or removed
•  the product has been damaged through abuse, neglect, 

accident, high voltage or corrosion

•  the product was not installed and operated according to 

the owner’s manual

BEFORE RETURNING ANY UNIT, A RETURN MATERIAL 

AUTHORIZATION (RMA) NUMBER IS REQUIRED

Warranty & Service

Содержание ME-AGS-S







































Отзывы:

Нет отзывов