1.1.2 Configuration Information
To utilize the QuickStart menu available on the
ECLIPSE Model 700, some key information is required
for configuration.
Gather the information and complete the following operating
parameters table before beginning configuration.
NOTES: The QuickStart menu is available for Level Only applications.
1. Refer to Section 2.6.5 for configuration menus for Interface,
Volume or Flow applications.
2. These configuration steps are not necessary if the transmitter
was pre-configured prior to shipment.
Display
Question
Answer
Level Units
What units of measurement will be used?
(inches, millimeters, centimeters, feet
or meters)
_____________
Probe Model
What probe model is listed on the
model information?
(first three digits of probe model number) _____________
Probe Mount
Is the probe mounted NPT, BSP,
or flange? (Refer to probe model.)
_____________
Probe Length
What probe length is listed on the
probe model information? (last three
digits of the probe model number)
_____________
Level Offset
The desired level reading when the
liquid is at the tip of the probe. (Refer
to Section 3.4 for more information.)
_____________
Dielectric Range What is the dielectric constant range
of the process medium?
_____________
4.0 mA
What is the 0 % reference point for the
Set Point
4.0 mA value?
_____________
20.0 mA
What is the 100 % reference point for
Set Point
the 20.0 mA value?
(Ensure that this value is outside of the
Blocking Distance when utilizing non-
overfill-capable probes.)
_____________
Failure Alarm
What output current is desired when
a Failure Indicator is present?
_____________
6
BE 57-660 Eclipse Model 700 Guided Wave Radar Transmitter
