22
BE 57-660 Eclipse Model 700 Guided Wave Radar Transmitter
2.6.2.5 Entering Character Data
This method is used for parameters requiring alphanumer-
ic character entry, such as for entering tags, etc.
General Menu Notes:
2.6.3 Password Protection
The ECLIPSE Model 700 transmitter has three levels of
password protection to restrict access to certain portions of
the menu structure that affect the operation of the system.
User Password
The User Password allows the customer to limit access to
the basic configuration parameters.
The default User Password installed in the transmitter at
the factory is 0. With a password of 0, the transmitter is
no longer password protected and any value in the basic
user menus can be adjusted without entering a confirming
password.
The user password can be changed to any numerical value
up to 59999.
NOTE: If a User Password is not known or has been misplaced, the
menu item New Password in the DEVICE SETUP/ADVANCED
CONFIG menu displays an encrypted value representing the
present password. Contact Technical Support with this
encrypted password to retrieve the original User Password.
Push button
Keystroke Action
▲
Up
Moves to the previous character (Z...Y...X...W).
If held down, the characters scroll until the push
button is released.
▲
Down
Moves to the next item character (A...B...C...D).
If held down, the characters scroll until the push
button is released.
▲
Back
Moves the cursor back to the left. If the cursor is
already at the leftmost position, then the screen
is exited without changing the original tag char-
acters.
▲
Enter
Moves the cursor forward to the right. If the
cursor is at the rightmost position, then the
new tag is saved.
