11
BE 57-660 Eclipse Model 700 Guided Wave Radar Transmitter
1.4.1.1 QuickStart Numerical Data Entry
To make numerical entry changes to Probe Length and
Level Offset:
UP
moves up to the next highest digit (0,1,2,3,....,9 or
the decimal point).
If held down the digits scroll until the push button is
released.
DOWN
moves up to the next lowest digit (0,1,2,3,....,9
or the decimal point). If held down the digits scroll until
the push button is released.
BACK
moves the cursor to the left and deletes a digit.
If the cursor is already at the leftmost position, then the
screen is exited without changing the previously saved
value.
ENTER
moves the cursor to the right. If the cursor is
located at a blank character position, the new value is
saved.
Scrolling further DOWN in the QuickStart menu results in
the remaining parameters appearing one by one, with the
present highlighted value shown at the bottom of the
screen.
BACK
returns to the previous menu without changing
the original value, which is immediately redisplayed.
ENTER
accepts the displayed value and returns to the
previous menu.
Negative values can be entered by highlighting the “+” sign
shown prior to the number, then pressing
UP
to change it
to show “-”.
▲
▲
▲
▲
▲
▲
