manualshive.com logo in svg

Magnetic Autocontrol MPR 112, Инструкция по эксплуатации и монтажу

Поделиться
Скачать
Magnetic Autocontrol MPR 112 Скачать руководство пользователя страница 7

Safety 

581E,5721/ 07/2006 MPR112_1 

page 7/72 

Version: 01 

2.

 

Safety

2.1   General safety notes 

The  MPR (

M

AGNETIC 

P

edestrian 

R

etractable Barrier) has been 

designed, built, and tested according to the latest available technol-
ogy. The product has left the factory in a fully operational and safe 
condition. However, it is imperative that the installation is carried out 
in accordance to this operating manual. Therefore, it is vital to read 
this operating manual in full before starting the installation and that 
all the safety notes and remarks are being observed. 

Any liability and warranty is declined by the manufacturer in the 
case of incorrect use and use for purposes other than intended by 
the design. 

2.2   Intended use 

The Magnetic pedestrian retractable MPR shall only be used to con-
trol pedestrians entering or exiting restricted areas. 

The Magnetic Universal Controller MBC and MMC shall only be 
used for controlling the Magnetic pedestrian retractable MPR. Any 
other use is not permitted. 

Conversions and modifications to the retractable or to the control 
modules are not permitted. 

Only original spare parts and accessories from Magnetic shall be 
used. 

NOTE! 

MAGNETIC is not responsible for any kind of damages, injuries 
and other faults resulting from non-observance of the intended use 
described in this chapter! 

Содержание MPR 112


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды