manualshive.com logo in svg

Magnetic Autocontrol MPR 112, Инструкция по эксплуатации и монтажу

Поделиться
Скачать
Magnetic Autocontrol MPR 112 Скачать руководство пользователя страница 10

Product Description 

581E,5721/ 07/2006 MPR112_1 

page 10/72 

Version: 01 

 

3.  

Product Description 

3.1 General 

The MPR retractable barrier is a user friendly access control barrier 
designed for rapid pedestrian entrance and exits to and from train 
stations, corporate receptions, airport terminals, immigration facili-
ties, sports stadiums, etc. 

The modular design allows a multitude of different lane and design 
configurations. The drive unit consists of our patented MHTM

™

  Di-

rect Drive (MHTM=Magnetic High Torque Motor) which has been 
designed to provide high reliability and maintenance free operation. 
The patented MHTM

™

 Direct Drive technology in combination with a 

unique Sinusoidal lever system provides a high duty cycle.  

The patented MHTM

™

 Direct Drive technology does not require 

gears of clutches of any kind resulting into a maintenance free op-
eration. 

 

In the event of a power failure, the flaps can close automatically by 
spring tension.  

The barrier can be operated in Bi- Directional mode. 

3.2 Drive unit 

The MHTM

™

 direct drive system does not require any gears or 

clutches. Therefore the motor is not subject to wear and tear and 
does not require any greasing or oiling. The MHTM

™

 motor is main-

tenance free. 

The drive system does not have any backlash. The motor has an 
extremely low mass resulting in low impact forces even with the 
fastest opening and closing times. The low noise level amounts ap-
proximately 40 dB. 

The motor sensor controls each movement precisely allowing an 
exact positioning of the flaps and optimum acceleration and decel-
eration phases. 

 

 

 

 

Содержание MPR 112


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды