Magnetic Autocontrol MPR 112, Инструкция по эксплуатации и монтажу

Страница: 41 / 81

Functional description of MBC110
581E,5721/ 07/2006 MPR112_1 page 41/72
Version: 01
8.3.9 DIP- switch 12: Behaviour after impact detection
Determines the behaviour after an impact detection.
DIP 12 Behaviour after impact detection
Off Wings are still trying to close (no retract)
On Wings open immediately and try to close with reduced
speed
8.3.10 DIP- switch 13: Reverse during closing
After receiving the close signal the wings try to close. If the PE
beams are covered before receiving the closed position, the wings
can either retract or continue closing operation.
DIP 13 Retract
Off Wings continue the closing procedure
On Wings open and stay open until blocked PE beams are
cleared
8.3.11 DIP- switch 14 - 15: Wing-Type
Determine the MPR wing type and aisle width
Aisle width Aisle width Aisle width
DIP 14 DIP 15
Standard 250 mm
housing Telescopic 2 0 0
mm housing
Telescopic 280
mm housing
Off Off Acrylic 520 mm 520 mm 960 mm
On Off Soft 520 mm 560 mm 900 mm
Off On Not used 600 mm Not used
On On Not used Not used Not used