MacKay Guardian SOLO, Руководство по эксплуатации и обслуживанию

Страница: 24 / 79

MacKay Guardian™ Solo
Operation and Maintenance Guide, v. 1.5
1)
The Solo is capable of displaying the following:
 Any symbol or pattern in a 64 high by 128 wide pixel graphics viewing area;
 Seven lines of small font text of up to 20 characters each
 Four lines of medium sized font text
 Two lines of large font text
 Negative sign or $ symbol (or other symbol) located to the left of the left-most
character;
 Colon located between the second and third digits, when displaying time;
 Decimal point located between the second and third digits for displaying cash values
($0.01 - $999.99);
 International "No Parking" indicator;
 "Low Battery" indicator;
 "Out of Order" indicator;
 ”Last Coin Invalid” indicator.
2)
The Solo has three front mounted LED indicators, a red, green and a yellow LED. The
normal configuration is to have the green LED flashing when the Solo is “OK” or when in
a valid “time displayed” state. It flashes the red LED when in a “No Parking” or “Meter
Expired” state and flashes the yellow LED to indicate to the service and maintenance
staff that the Solo is in a “maintenance required” state.
3)
The programmed behavior of the indicator LEDs can only be adjusted by replacing the
Solo’s display attributes file. This file is created by and supplied by the manufacturer.
Note that the indicator LEDs on the rear of the Solo follows the exact same indicator
behavior as the LEDs on the front of the Solo.
14