![background image](http://html1.mh-extra.com/html/macdon/r113-sp/r113-sp_operators-manual_3435729155.webp)
215009
141
Revision A
1011147
A
B
C
D
Figure 4.88: Driveline
4.
Lubricate spindle splines (A). For specifications, refer to the
inside back cover of this manual.
NOTE:
The driveline U-joints were greased at the factory and are
considered to be lubricated for life. No further lubrication is
required.
NOTE:
For clarity, the illustration shows a cutaway view of the
drum and the tube shield.
5.
Insert driveline (B) at an angle and guide it past hub
drive (C) and drum (D).
6.
Insert splined spindle end (A) into the splined bore on
driveline (B).
1011137
A
A
B
C
Figure 4.89: Driveline
7.
Place a bead of medium-strength threadlocker
(Loctite
®
243 or equivalent) around the threads of four
M12 hex flange head bolts (A). Use the bolts and spacers to
secure driveline assembly (B) to hub drive (C). Torque bolts
to 102 Nm (75 lbf·ft).
1011136
A
B
Figure 4.90: Driveline Shield
8.
Position two drum shields (B) as shown. Apply a bead of
medium-strength threadlocker (Loctite
®
243 or equivalent)
around the threads of eight M8 hex flange head bolts (A).
Use the bolts to secure the drum shields in place. Torque to
27 Nm (20 lbf·ft).
Содержание R113 SP
