![background image](http://html1.mh-extra.com/html/macdon/r113-sp/r113-sp_operators-manual_3435729045.webp)
215009
31
Revision A
1023024
A
B
Figure 3.21: Header Support
16. Install clevis pin (A) through support and windrower lift arm
and secure with hairpin (B). Repeat for the opposite side of
the header.
IMPORTANT:
Ensure clevis pin (A) is fully inserted, and hairpin is installed
behind bracket.
1029799
A
Figure 3.22: Safety Prop
17. Disengage safety props on both lift cylinders as follows:
NOTE:
If safety prop will not disengage, raise header to release
the prop.
a.
Turn lever (A) away from header to raise safety prop
until lever locks into vertical position.
b.
Repeat for opposite cylinder.
1014802
A
Figure 3.23: GSL
18. Start the engine and press HEADER DOWN switch (A) on
GSL to fully lower header.
NOTE:
If not prompted by the HPT display to restore float, restore
float manually.
19. Stop the engine and remove the key.
Содержание R113 SP
