![background image](http://html1.mh-extra.com/html/macdon/r113-sp/r113-sp_operators-manual_3435729139.webp)
215009
125
Revision A
4.5.5
Maintaining Accelerators
1024791
A
Figure 4.53: R113 SP Cutterbar Accelerators
Accelerators (A) are mounted on each outboard disc and are
designed to quickly move cut material off the disc and into the
conditioner.
One pair of accelerators is installed at each outboard end of a
R113 SP.
Periodically inspect accelerators for damage and loose or
missing fasteners, and replace as necessary.
IMPORTANT:
Always replace accelerators in pairs to ensure proper disc
balance.
Inspecting Accelerators
WARNING
To avoid bodily injury or death from unexpected startup of machine, always stop the engine and remove the key from
the ignition before leaving the operator
’
s seat for any reason.
1.
Raise the header fully.
2.
Shut down the engine, and remove the key from the ignition.
3.
Engage the windrower lift cylinder safety props. For instructions, refer to
3.3 Engaging and Disengaging Header Safety
.
4.
Open the cutterbar doors. For instructions, refer to
.
CAUTION
Discblades have two sharp cutting edges that can cause serious injury. Exercise caution and wear gloves when working
with blades.
1024791
A
Figure 4.54: Cutterbar Accelerators
5.
Inspect accelerators (A) for damage and wear, and replace
if worn to 50% or more of their original height or if they are
no longer effectively moving crop.
6.
Tighten or replace loose or missing fasteners.
Содержание R113 SP
