215794
14
Revision A
IMPORTANT:
Forklifts are normally rated for a load located 610 mm (24 in.) ahead of the back end of the forks. To determine the forklift
capacity at 122.2 cm (48 in.), check with your forklift distributor.
1.
Move the trailer onto level ground and block the trailer wheels.
2.
Set the forklift tines to the widest possible setting.
3.
Position one forklift on either side of the trailer, and position the forks under the windrower frame.
NOTE:
The windrower
’
s center of gravity is approximately 139.7 cm (55 in.) rearwards from the center of the drive wheel.
4.
Lift with both forklifts simultaneously until the windrower is clear of the trailer deck.
WARNING
Ensure the forks are secure before moving the trailer away from the load. Stand clear when lifting.
5.
Drive the truck slowly forward until the trailer deck is clear of the windrower.
6.
Lower the unit slowly to the ground using both forklifts simultaneously. If the ground is soft, place wooden blocks
under the front shipping stands.
7.
Back the forklifts away from the windrower.
8.
Check the windrower for shipping damage, and check the shipment for missing parts.