215794
192
Revision A
1029714
A
B
Figure 8.111: Float Linkage
5.
Remove the float engagement pin from hole (A) to
disengage the float springs. Insert the float engagement pin
into storage hole (B). Secure the engagement pin with the
lynch pin.
IMPORTANT:
To prevent damage to the lift system when lowering the
header lift linkages without a header or a weight box
attached to the windrower, ensure that the float
engagement pin is installed in storage hole (B) and
NOT
in
engaged position (A).
6.
Repeat the previous step for the other float
engagement pin.
1008925
A
Figure 8.112: Ground Speed Lever
DANGER
Ensure that all bystanders have cleared the area.
7.
Start the engine and activate HEADER DOWN button (A) on
the ground speed lever (GSL) to fully retract the header lift
cylinders.
1000757
A
B
Figure 8.113: Hydraulic Center-Link without Self-
Alignment Kit
8.
Remove pin (A) from the frame linkage and raise center-
link (B) until the hook is above the attachment pin on the
header. Replace pin (A) to hold the center-link in place.
IMPORTANT:
If the center-link is too low, it may contact the header as
the windrower approaches the header for hookup.