215794
33
Revision A
1005780
A
B
Figure 3.26: Radio Receptacle
6.
Position receptacle (A) (supplied with the radio) into the
opening, and secure it by bending tabs (B) on the
receptacle against the panel.
1005794
A
Figure 3.27: Radio Installed
7.
Insert the radio into the receptacle and attach the radio
bezel. Ensure the radio locks into position and faceplate (A)
is against the panel.
1006086
A
B
C
F
E
D
Figure 3.28: Six-Pin Connector Terminal Arrangement
A - Left Speaker Power (+)
B - Left Speaker Ground (
–
)
C - Radio Ground (
–
)
D - Right Speaker Ground (
–
)
E - Right Speaker Power (+)
F - Radio Power (+) (Live when Ignition is ON)
8.
Ensure the radio has a six-pin connector
(Packard #2977042) and that the terminal arrangement is
as shown at right.
9.
Attach the following two additional wires from the wiring
harness to the radio:
a.
Circuit 503:
The red live wire with a 1/4 in. female
blade terminal provides power for the radio clock/
memory if the radio is equipped with this feature.
b.
Circuit 315:
The black ground wire attaches to the
radio body.
10. Plug the antenna cable into the radio.