215794
79
Revision A
1011760
CXXX
EXXX
WINDROWER SETUP?
NO/YES
A
B
C
Figure 5.47: CDM Programming Buttons
1.
Turn the ignition key to the RUN position, or start the
engine.
2.
Press PROGRAM (A) and SELECT (C) on the CDM to enter
programming mode.
•
WINDROWER SETUP? will appear on the upper line.
•
NO/YES will appear on the lower line.
3.
Press right arrow (B) to select YES. Press SELECT (C).
•
SET KNIFE SPEED? will appear on the upper line.
1011833
CXXX
EXXX
HEADER REEL SPEED
RPM/MPH
D
C
B
A
Figure 5.48: Reel Speed Display
4.
Press SELECT (D) until HEADER REEL SPEED? appears on the
upper line.
•
RPM/MPH or RPM/KPH will appear on the lower line.
5.
Press left arrow (B) or right arrow (C) to select either
IMPERIAL or METRIC units. Press SELECT (D).
6.
Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to the next WINDROWER SETUP
option.
5.3.15
Setting Tire Size
The windrower
’
s tire size must be correctly configured in the cab display module (CDM) for the windrower
’
s ground speed
to be reported accurately. This setting can be configured by accessing the SET TIRE SIZE sub-menu in the WINDROWER
SETUP menu.
1011760
CXXX
EXXX
WINDROWER SETUP?
NO/YES
A
B
C
Figure 5.49: CDM Programming Buttons
1.
Turn the ignition key to the RUN position, or start the
engine.
2.
Press PROGRAM (A) and SELECT (C) on the cab display
module (CDM) to enter programming mode.
•
WINDROWER SETUP? will appear on the upper line.
•
NO/YES will appear on the lower line.
3.
Press right arrow (B) to select YES. Press SELECT (C).
•
SET KNIFE SPEED? will appear on the upper line.
