215794
129
Revision A
Steering and neutral safety check:
1007136
A
Figure 6.4: Operator
’
s Station
14. Shut down the engine and center the steering wheel. Place
the GSL (A) in NEUTRAL, but not in N-DETENT.
15. Try starting the engine and confirm the CDM flashes
CENTER STEERING on the upper line and PLACE GSL INTO N
on the lower line accompanied by a short beep with each
flash. The engine should
NOT
turn over.
16. If the engine turns over, the safety system requires
adjustment. Refer to the windrower technical manual for
adjustment procedures.
Seat base lock safety check:
1007127
C
B
A
Figure 6.5: Operator
’
s Station
17. Ensure the operator
’
s station is
NOT
locked. To unlock the
operator
’
s station, pull up and hold knob (B) to release
latch (C), and turn the steering wheel to unlock the
operator
’
s station.
18. Center the steering wheel and place GSL (A) in N-DETENT.
Try starting the engine and confirm that the engine cranks
but does
NOT
start, and the CDM displays SEAT BASE NOT
LOCKED.
19. If the engine starts, the safety system requires adjustment.
Refer to the windrower technical manual for adjustment
procedures.