WINDROWER TRACTOR OPERATION
Form # 169017
68
Issue – June 2008
k. Make the electrical connections (K) at the
header wheel and at the joint (L).
l. Attach weight box to tractor lift arm linkage as
follows:
1. Drive tractor so that tractor lift arms are
positioned into the weight box pockets.
2. Raise lift arms slightly and install locking
pins (D) into pockets and thru tractor legs.
Secure with hairpin.
NOTE
Pins (D) were previously removed from
the lower header leg attaching point.
3. Route the weight box harness (E) to the
electrical connector at the left side lift
linkage and connect harness to connector.
m. Attach slow speed transport hitch to the weight
box tongue with drawbar pin (secure using lynch
pin). Attach safety chain.
n. Connect hitch harness to electrical socket at
front of weight box.
(continued next page)
D
E
L
K