OPERATOR’S STATION
Form 169017
27
Issue – June 2008
5.16 HEADER CONTROLS
All header controls are conveniently located on
the operator’s console and on the GSL handle.
NOTE
Some controls are optional equipment and
may not be present in your unit. Some
controls may be installed, but will be non-
functional for certain headers.
5.16.1
Header Engage Switch
Engages and disengages header drive.
IMPORTANT
Always move throttle lever back to idle
before engaging header drive. Do not
engage header with engine at full RPM.
5.16.2
Header Drive Reverse Button
Reverses knife and conditioner on D Series
draper headers.
Reverses reel, auger, knife and conditioner on A
Series auger headers.
Not applicable for R Series rotary headers.
NOTE
To re-engage header drive, push down
and pull up header drive knob.
HEADER DRIVE
ENGAGE
– Pull Up
DISENGAGE
– Push Down
HEADER REVERSE
ENGAGE
– Push/Hold/Engage Header
DISENGAGE
– Release Button