MAINTENANCE/SERVICE
Form 169017
179
Issue – June 2008
c. Remove light from receptacle.
d. Pinch the wire retainer (K) and lift away from
hooks.
e. Remove bulb (L) from body and pull wire from
connector (M).
IMPORTANT
Do not touch the glass of the halogen bulb
as the oils or other chemicals from your
skin will cause the bulb to fail prematurely.
f. Match slots on new bulb (L) with lugs (N) in
optical unit and insert bulb into unit.
g. Secure bulb with wire retainer (K).
h. Push wire into connector (M).
i. Position light into light receptacle, ensuring top
is up, and secure with bezel (J) and screws (H).
7.12.6
Red and Amber Lights
a. Shutdown engine and remove the key. Turn off
the lights.
NOTE
Hold onto the hand-holds (A) on the cab
front corners and stand on the header
anti-slip strips or stand on the
maintenance platform when accessing the
red and amber lights.
b. Remove two screws (B) from lens and remove
lens.
c. Push and twist light bulb (C) to remove from
socket.
d. Install new bulb (C) in socket ensuring that bulb
base is properly engaged in socket. Use Bulb
Trade #1157 for red tail-lights and #1156 for
amber lights.
e. Reinstall
lens
with screws (B).
C
M
K
L
N
H
J
B
A
