M7 DS-201, Инструкция по эксплуатации

Страница: 6 / 92

SAFETY SYMBOLS
Some of these following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and
more safely.
SYMBOL Name Designation / Explanation
Volts Voltage
Amperes Current
Hertz Frequency (Cycles Per Wecond)
Watts Power
Alternating Current Type Of Current
Direct Current Type Or Characteristic Of Current
No-load Speed Rotational Speed At No Load
Pounds Weight
Class II Construction
Wear Safety Goggles
Double Insulated Construction
The operation of any
power tool can result in foreign objects
being thrown into your eyes, which can
result in severe eye damage. Before
beginning power tool operation, always
wear safety goggles or safety glasses
with side shields and a full-face shield
when needed. We recommend a Wide
Vision Safety Mask for use over eye-
glasses or standard safety glasses with
side shields. Always use eye protection
which is marked to comply with ANSI
Z87.1.
Per Minute
Revolutions, Strokes, Surface Speed
Orbits, etc., Per Minute
To ensure safety and reliability, all repairs should be performed by a
qualified service technician.
V
A
Hz
W
.../min
lbs
n
WARNING:
!
WARNING:
!
6