M7 DS-201, Инструкция по эксплуатации

Страница: 7 / 92

SPECIFIC SAFETY RULES
SPECIFIC SAFETY WARNINGS
Some dust created by
power sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known to cause cancer, birth
defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
1. Hold power tool by insulated
grippingsurfaces, when performing
an operation where the fasterner may
contact hiddenwiring or its own cord.
Fasterner contacting a “live” wire may
make exposed metal parts of the power
tool “live” and could give the operator an
electric shock.
2. Use only with the chargers and batteries
listed below:
3. Always wear safety goggles and
earprotection when using this tool.
4. Ensure the switch is in the off
positionbefore inserting battery pack.
Inserting thebattery pack into power tools
that have theswitch on invites accidents.
5. Check the impact socket carefully
forwear, cracks or damage before
installation.
6 . Bit, sockets and tools get hot
duringoperation. Wear gloves when
touchingthem after use.
7. Remove the battery pack beforechanging
accessories. Accidental startingmay
occur, because battery applianceswith
a battery inserted are in the
operativecondition.is off before attaching
the battery pack.
Battery Pack
DB-1850P
Charger
DC-18A
WARNING:
!
7