M7 DS-201, Инструкция по эксплуатации

Страница: 3 / 92

BATTERY TOOL USE AND CARE
SERVICE
1. Make sure that the switch is in the OFF
position before inserting the battery pack.
Inserting the battery pack into power tools
that have the switch ON invites accidents.
2. Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
3. Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
4. When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
5. Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6. Battery tools do not have to be plugged
into an electrical outlet; therefore, they are
always in operating condition. Be aware
of possible hazards when not using your
battery tool or when changing accessories.
Following this rule will reduce the risk of
electric shock, fire, or serious personal
injury.
7. Do not place battery tools or their batteries
near fire or heat. This will reduce the risk of
explosion and possible injury.
8. Do not crush, drop or damage the battery
pack. Do not use a battery pack or charger
that has been dropped or received a sharp
blow. A damaged battery is subject to
explosion. Properly dispose of a dropped
or damaged battery immediately.
9. A damaged battery is subject to explosion.
Properly dispose of a dropped or damaged
battery immediately.
10. Do not charge a battery tool in a damp
or wet location. Following this rule will
reduce the risk of electric shock.
Storage Recommendations
1. The best storage place is one that is cool
and dry, away from direct sunlight and
excessive heat or cold.
2. For long storage, it is recommended to
store a fully charged battery pack in a cool
dry place out of the charger for optimal
results.
Note : The battery pack will need to be
recharged before use.
1. Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
2. Never service damaged battery packs.
Service of battery packs should only
be performed by the manufacturer or
authorized service providers.
3