M7 DS-201, Инструкция по эксплуатации

Страница: 14 / 92

OPERATION
TRIGGER SWITCH (FIG. 2)
VARIABLE SPEED
MODE SELECTOR (FIG. 4)
DIRECTION -OF-ROTATION
SELECTOR (FORWARD/CENTER-
LOCK/REVERSE) (FIG. 3)
1. To turn the impact driver on, depress the
trigger switch.
2. To turn it off, release the trigger switch.
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
The direction of rotation is reversible and is
controlled by a selector located above the
trigger switch. With the impact driver held
in normal operating position: position the
direction-of-rotation selector to the left of
the tool for forward rotation; position the
direction-of-rotation selector to the right
of the tool for reverse rotation. Setting the
switch in the OFF (center-lock) position
helps to reduce the possibility of accidental
starting when not in use.
NOTICE: To prevent gear damage, always
allow the impact driver to come to a
complete stop before changing the
direction of rotation.
NOTICE: The impact driver will not
run unless the direction of the rotation
selector is engaged fully to the left or
right.
NOTICE: The impact driver is designed
with 3-speed and auto-stop functions;
these functions are available only when
the tool is operating in forward rotation.
NOTICE: The mode can only be changed
when the mode-indicator light is on. The
mode-indicator light will be off
automatically in about one minute.
FIG. 2
Trigger
Switch
Direction
Of
Rotation
Selector
FIG. 3
Forward Reverse
FIG. 4
AUTOSTOP
Mode Selector
Auto-stop
Indicator
Mode Indicator
L H
14