M7 DS-201, Инструкция по эксплуатации

Страница: 13 / 92

ASSEMBLY
ASSEMBLY
UNPACKING
TO DETACH BATTERY
PACK (FIG. 1)
TO ATTACH BATTERY
PACK (FIG. 1)
If any part is broken
or missing, DO NOT attempt to attach the
battery or operate the tool until the broken
or missing part is replaced. Failure to do so
could result in possible serious injury.
Do not attempt to
modify this tool or create accessories not
recommended for use with this tool. Any
such alteration or modification is misuse
and could result in a hazardous condition
leading to possible serious injury.
Your tool should never
be connected to the battery when you are
assembling parts, making adjustments,
installing or removing blades, cleaning, or
when it is not in use. Disconnecting the tool
will prevent accidental starting, which could
cause serious personal injury.
1. Carefully remove the tool and any
accessories from the carton. Make sure
that all items listed in the packing list are
included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
1. Make sure that the tool is switched off.
2. Depress the battery-release button located
on the front of the battery pack to release
the battery pack.
3. Pull the battery pack out and remove it
from the tool.
1. Make sure that the tool is switched off.
2. Align the raised rib on the battery pack with
the grooves on the bottom of the impact
driver, and then slide the battery pack onto
the tool.
NOTICE: Make sure that the latch on the
battery pack snaps into place and the
battery pack is secured to the sander before
operation.
WARNING:
!
WARNING:
!
WARNING:
!
Battery-release
Button
Detach
Attach
FIG. 1
13