103
DL8 USERS
MANUAL EM-7691-B Rev.24
(7) Assign a prepared message to an event.
The below example illustrates how to assign an event when AI goes into a specific zone.
The setting procedure is the same for DI status changes, DI count reaching target value, or PI going into a specific
zone. Click [Alarm zone setting] button in “AI” setting dialog to open “Alarm zone setting” dialog.
Click [E-mail] button in the zone to display “Select event” list.
Analog Input (AI)
AI
Alarm zone setting
2.Double-click
Select event
1.Click
4.Click
Input/Output
3.Click
Different messages can be sent depending on the signal’s transition direction (up/down) from one zone to another for AI
and PI. Prepared messages for event report are listed in “Select event” list. Choose a mail to send.
Transfer the setting to the DL8 on completion of setting all zones and channels.
9.3.3 COPYING MESSAGES
Messages can be copied in “Event report” list.
1. Right-click and
select "Copy".
2. Right-click and
select "Paste".
