![background image](http://html1.mh-extra.com/html/m-system/47dm/47dm_operating-manual_3112621074.webp)
74
47DM OPERATING MANUAL EM-9510-B Rev.6
5
Press Shift button to shift the display into the setting standby
mode. Then press Shift and Up buttons to set the bargraph
upper limit.
• The sixth digit starts blinking, to which you can apply changes.
• Set within the range of -20000 to 100000.
NOTE
Set the bargraph upper limit with the decimal point position set in the decimal point position setting.
6
Press Alarm/
↓
or Scale/
↑
button to apply the new value.
• The bargraph upper limit is registered and the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the input scaling value Zero will be indicated (‘ZERO’ on the SD), or the analog output type
will be indicated (‘ANG TYP’ on the SD).
• Press Scale/
↑
button, and the bargraph lower limit will be indicated (‘BAR-L’ on the SD).
7
Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode.
Blinking