![background image](http://html1.mh-extra.com/html/m-system/47dm/47dm_operating-manual_3112621103.webp)
103
47DM OPERATING MANUAL EM-9510-B Rev.6
4
Press Alarm/
↓
or Scale/
↑
button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the L (H or HH) setpoint (‘ALARM L’, ‘ALARM H’ or ‘ALARMHH’ on the SD), P ON delay time
(‘ONDLY P’ on the SD) or the main display blinking at alarm (‘ALMBLNK’ on the SD) will be indicated.
• Press Scale/
↑
button, and the LL (L, H, HH or P) one-shot output will be indicated (‘SHOT LL’, ‘SHOT L’, ‘SHOT H’,
‘SHOT HH’ or ‘SHOT P’ on the SD).
5
■
TO GO ON TO SET ANOTHER COIL AT ALARMS,
Repeat operation from Step 2.
■
TO SET THE NEXT PARAMETER,
Skip to Step 2 in “8.9 MAIN DISPLAY BLINKING AT ALARM”.
■
TO QUIT,
Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode.