![background image](http://html1.mh-extra.com/html/m-system/47dm/47dm_operating-manual_3112621051.webp)
51
47DM OPERATING MANUAL EM-9510-B Rev.6
3
Press Alarm/
↓
or Scale/
↑
button to go to the display scaling
value Zero setting.
• The display scaling value Zero is indicated.
• The SD indicates ‘DISP-Z’.
• ‘Zro’ indicator turns on.
NOTE
Skip to Step 7 if the default value is acceptable.
4
Press Shift button to shift the display into the setting standby
mode.
• The sixth digit starts blinking, to which you can apply changes.
5
Press Shift and Up buttons to set to ‘0000.00’.
• Press Shift button to go to the next digit and Up button to change
the blinking value.
NOTE
• ‘0000.00’ is a display example. Set any value within the range of -20000 to 100000.
• The decimal point position depends on the decimal point position setting. Disregard the decimal point here.
• The negative sign (-) must be set to the 6th digit. For example, set ‘-004.00’ instead of ‘-4.00’.
6
Press Alarm/
↓
or Scale/
↑
button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the input scaling value Span will be indicated (‘SPAN’ on the SD).
• Press Scale/
↑
button, and the input scaling value Zero will be indicated (‘ZERO’ on the SD).
7
■
TO GO ON TO SET THE INPUT SCALING VALUE SPAN,
Skip to Step 3 in “3.3 STEP 3. INPUT SCALING VALUE SPAN”.
■
TO QUIT,
Hold down Alarm/
↓
or Scale/
↑
button for 1 second or more to return to Measuring Mode.
Blinking
Blinking