![background image](http://html1.mh-extra.com/html/m-system/47dm/47dm_operating-manual_3112621010.webp)
10
47DM OPERATING MANUAL EM-9510-B Rev.6
Tighten the terminal blocks and terminal block screws with a specified torque.
• Excessive fastening may result in damage of the screws and loose screws may occasionally result in ignition.
Do not throw the unit into the fire.
• Doing so may result in rupture of the electronic component.
Never discompose or remodel the unit.
• Doing so may result in electric shock, malfunction or injury.
Do not connect or remove the unit while its power is on.
• Doing so may result in electric shock, malfunction or injury.
Do not allow fine shavings or wire scraps to enter the unit in machining screws or wiring.
• Doing so may result in malfunction of the unit.
Make sure to attach the terminal cover.
• Failure to do so may result in electric shock.
Do not pull the wires connecting to the unit.
• Doing so may result in electric shock, damage of the unit or injury.
Do not use the unit in an atmosphere where combustible gas is present.
• Doing so may result in inflammation, ignition, or smoke.
Do not cover the ventilation slits with cables, etc.
• Doing so may result in malfunction or heating.