![background image](http://html1.mh-extra.com/html/m-system/47dm/47dm_operating-manual_3112621077.webp)
77
47DM OPERATING MANUAL EM-9510-B Rev.6
7.1 ANALOG OUTPUT TYPE
7.1.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the specifications and settings.
1
Hold down Scale/
↑
button for 3 seconds or more to move on to
Scaling Setting Mode.
• The input scaling value Zero is indicated.
• The SD indicates ‘ZERO’.
• ‘Zro’ and ‘Tch’ indicators turn on.
2
Press Alarm/
↓
or Scale/
↑
button to go to the analog output
type setting.
• The analog output type is indicated.
• The SD indicates ‘ANG TYP’.
3
Press Shift and Up buttons to select the analog output type.
• Select one among ‘4-20MA’, ‘0-5V’, ‘5V’, ‘10V’ and ‘0-20MA’.
4
Press Alarm/
↓
or Scale/
↑
button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the analog output function mode will be indicated (‘ANG VAL’ on the SD).
• Press Scale/
↑
button, and the bargraph upper limit will be indicated (‘BAR-H’ on the SD), or the bargraph type will be
indicated (‘BAR-GRH’ on the SD) with the bargraph type set to “no bargraph”.
2,4
1,2,
4
3
3
Blinking