![background image](http://html1.mh-extra.com/html/m-system/47dm/47dm_operating-manual_3112621217.webp)
217
47DM OPERATING MANUAL EM-9510-B Rev.6
34.2 INITIALIZING SETTING VALUES
To restart setting from the default state, initialization can be used. Refer to attached 35.3 PARAMETER LIST for the default
values.
IMPORTANT
• Currently set parameters will be lost after an initialization. It is recommended to record the parameters before initializa-
tion.
• Even if the unit is shipped with the specified parameters with the option code ‘/SET’, such parameters will be lost after
an initialization. Be careful that the initialization does not recover the ex-factory settings.
34.2.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the settings.
1
Hold down Max/Min and Alarm/
↓
buttons at once for a preset
time duration to move on to Lockout Setting Mode.
• The alarm setting lockout is indicated.
• The SD indicates ‘AL PRT’.
2
Press Alarm/
↓
or Scale/
↑
button to go to the initialization.
• The initialization is indicated.
• The SD indicates ‘INIT’.
3
Press Shift or Up button to select ‘RESET’.
4
Press Alarm/
↓
or Scale/
↑
button to execute the initialization.
• All the settings are initialized and the display returns to Measuring Mode.
1,2,
4
2,4
3
3
1
Blinking