![background image](http://html1.mh-extra.com/html/m-system/47dm/47dm_operating-manual_3112621177.webp)
177
47DM OPERATING MANUAL EM-9510-B Rev.6
22.2 BAUD RATE
22.2.1 OPERATING PROCEDURE
NOTE
The following figures are display examples. The displays
depend on the settings.
1
Hold down Alarm/
↓
and Shift buttons at once for 3 seconds or
more to move on to Modbus Setting Mode.
• The device address is indicated.
• The SD indicates ‘EQP-NO’.
2
Press Alarm/
↓
or Scale/
↑
button to go to the baud rate setting.
• The baud rate is indicated.
• The SD indicates ‘B-RATE’.
3
Press Shift and Up buttons to select the baud rate.
• Select one among ‘1200’, ‘2400’, ‘4800’, ‘9600’, ‘19200’ and ‘38400’.
4
Press Alarm/
↓
or Scale/
↑
button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the parity bit will be indicated (‘PARITY’ on the SD).
• Press Scale/
↑
button, and the device address will be indicated (‘EQP-NO’ on the SD).
1,2,
4
2,4
1,3
3
Blinking