57
47DR OPERATING MANUAL EM-9509-B Rev.7
■
SHIFTING THROUGH SETTING PARAMETERS
(1) Parameter shifting in Initial Setting Mode
In Initial Setting Mode, pressing Alarm/
↓
button shifts one parameter to the next (clockwise in the following figure). Pressing
Init/
↑
button shifts one to the previous (counterclockwise).
NOTE
• The display depends on the specifications and settings. The above displays show default values.
• Hold down Alarm/
↓
or Init/
↑
button for 1 second or more to return to Measuring Mode from each parameter.
Measuring Mode
Decimal point position
Input comp. A input value
Input comp. A comp. value
Input comp. B input value
Input comp. B comp. value
for ≥ 3 sec.
Hold down Init/
↑
Input type
Analog output function mode
*
2
Analog output 0% adjustment
*
2
Analog output 100% adjustment
*
2
*
1 Disabled with “no bargraph” selected for the bargraph type parameter.
*
2 Disabled with no-DC-output type (DC output code ‘0’ ).
Initial Setting Mode
Bargraph type
Bargraph lower limit
*
1
Bargraph upper limit
*
1
Analog output type
*
2
Analog output 0%
*
2
Analog output 100%
*
2
Temperature unit
