52
47DR OPERATING MANUAL EM-9509-B Rev.7
2
Hold down Init/
↑
button for 3 seconds or more to move on to
Initial Setting Mode.
• The input type is indicated.
• The SD indicates ‘RTTYPE’.
NOTE
Some alarm indicators turn on with the parameter display. The alarm indication is due to the last status before mode
transition held but does not show the unit failure.
3
Press Alarm/
↓
or Init/
↑
button to go to the decimal point posi-
tion setting.
• ‘0.0’ is indicated.
• The SD indicates ‘D-POINT’.
NOTE
Skip to Step 7 if the default value is acceptable.
4
Press Shift button to shift the display into the setting standby
mode.
• The indication starts blinking, to which you can apply changes.
5
Press Up button to select ‘00.0’.
6
Press Alarm/
↓
or Init/
↑
button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/
↓
button, and the input compensation A input value will be indicated (‘CR-A IN’ on the SD).
• Press Init/
↑
button, and the temperature unit will be indicated (‘UNIT’ on the SD).
7
■
TO GO ON TO SET THE BARGRAPH TYPE,
Skip to Step 2 in “8.1 BARGRAPH TYPE”.
■
TO QUIT,
Hold down Alarm/
↓
or Init/
↑
button for 1 second or more to return to Measuring Mode.
Blinking
Blinking
