Lust MASTERCONTROL MC6000 Series, Инструкция по эксплуатации

Страница: 33 / 177

Instruction Manual MC6000
4-5
Motors with terminal boxes
For correct EMC wiring of motors, screw glands with
large surface area screening contact should be used,
such as TOP-T-S by Lütze. Various cable outlet
arrangements can be obtained by turning the terminal
box (square terminal boxes can be turned by 90°
rectangular ones by 180°).
It is important to ensure correct sealing of cable outlets
or IP65 protection cannot be ensured.
Warning: Dange of Fire
Surface temperatures of above 100°C occur on the motors. No temperature-sensitive items
may be placed or fixed on them.
Motor maintenance
The only motor maintenance that is required is the cleaning of the surface of motor. The radial
deep groove ball bearings of the motors are sealed bearings designed for 20,000 operating
hours. Series ASx and PSx must not be dismantled.
If the motor has an external fan, this must be
connected appropriately and the correct direction of
rotatation of the fan checked (c.f. direction of rotation
arrow on the fan casing).
An adequate supply of cooling air is required for
effective cooling.
Motor cooling
Permissible environmental temperature of motors is -5 to 40°C. The motors must be mounted
such that adequate heat dissipation is provided by convection and radiation. In the case of self
cooling motors, overheating problems may result from cramped installation (eg in confined spaces
or shafts).
1
2
3
1 = U
2 = V
3 = W
= PE
1 = L1
2 = N
= PE
1
2
IP65 protection is only provided in the case
of approved wiring of connectors, both of
them fully engaged.
Suitable matching connector:
eg Interconnectron, Type LPNA 08B NN
+ –
1
2
U V W
BR
BR2
U V W
4
3
2
1
No. Function
1 PTC Thermistor
2 Holding brake (option)
3 Not allocated
4 Motor
Motors with connector
1 U
2 PE
3 W
4 V
A Brake +
B Brake –
C PTC
D PTC
Contact Allocation
No.
1
2
3
A
B
C
D
4