Lust MASTERCONTROL MC6000 Series, Инструкция по эксплуатации

Страница: 152 / 177

Instruction Manual MC6000
11-3
11.3 EKL300
The inputs and outputs of I/O Module 1 can be wired directly in the cabinet using the external
terminal module EKL300. LED's indicate the status of inputs and outputs.
The EKL300 is three wire. Connecting initiators is a simple task using the +24V signal and
ground. The terminal module is simply mounted on a Z rail.
In the Servocontroller the I/O Module 1 is connected via a 25 way connecting cable. The
KSS252 (1.8m long) is connected to connector X5 on the EKL300. 8 inputs can be wired on the
X1 terminals, and 4 outputs on the X2 terminals.
The EKL300 can also be used in conjunction with the positioning and sequence control P
OS
M
OD
1.
The terminals are then allocated differently and the range of functions is extended, (see description
of P
OS
M
OD
1).
,
,
,
,
,
,
,
,
y
y
y
y
y
y
y
y
PTC PTC U W V
L1 L2 L3
RB RB
+ -
1
2
3
4
1 2 3
4 5 6
7 8 9 1
0
1 2 3
4 5 6
No. Function
1 MC6000 Servocontroller
2 I/O Module 1 (model code AH1)
3 EKL300 terminal module
4 Connecting cable KSS252 (25 way, 1.8m long)
Features of EKL300:
• for direct wiring of inputs and outputs in the casing
• 3 wire technology (signal, +24V and ground) for
easy connection of initiators
• LED's as status indicators for inputs and outputs
• installation of terminal module on Z rail
• dimentions W x H x D: 113 x 78 x 72mm
• maximum connection cross section 2,5mm²