Credit Card Scanners
Many retail businesses and restaurants use credit card scanners to get instant
approval of credit card purchases. The system allows your credit card scanners
to share the lines in your system (as shown in Figure 4-7). You can install the
credit card scanner on an extension by itself, or combine it with a system phone
or a standard phone on the same extension (see “Combination Extensions” in the
PARTNER Advanced Communications System Installation guide).
Figure 4-7. Credit Card Scanner
Using Credit Card Scanners
When you make a call on the credit card scanner, an outside line is
automatically selected. If you combine the credit card scanner with a system
phone or standard phone, you cannot use the phone while the credit card
scanner is operating. You can use only one of the devices at a time.
Programming Credit Card Scanners
1.
Use
Line Assignment (#301)
to assign the lines you want the scanner to use
to extension X.
2.
Set
Automatic Line Selection
for extension X to select the outside lines that
the scanner is to use.
3.
Set
Automatic Extension Privacy (#304)
for extension X to Assigned.
4.
Make sure extension X is not assigned as a
Call Waiting (#316)
extension.
5.
If the scanner has an auto answer feature, turn it off.
6.
For multiple scanners, repeat Steps 1–5 for each extension.
Lines
Ext
X
CONTROL
UNIT
Credit
Card
Scanner
Telephone
(optional)
Transfr
Feature
Intercom
ABC
2
DEF
3
1
+
–
Conf
JKL
5
MNO
6
TUV
8
WXYZ
9
Mic
HFAI
Hold
0
GHI
4
PQRS
7
*
#
Spkr
Intercom
Ext.
Message
Using Auxiliary Equipment
4-13
Содержание PARTNER Advanced Communications System Release 1.0
Страница 6: ...iv...
