Related Features
and
Star Code Dial Delay settings apply to
is set to Rotary, star codes are entered by dialing
11
instead of
*
. If you have users at extensions with
set to Local Only who are calling out on lines with the
Dial Mode (#201) set to Rotary, you should add “11” to an
and assign the list to these extensions. Otherwise,
when the users at the restricted extensions dial 1 to begin a star code, the
system interprets this as an attempt to place a long-distance call, the call is
blocked, and the user hears the reorder tone.
can begin with a star code; the system
automatically inserts a delay based on the Star Code Dial Delay (#410)
setting. To program, enter a Pause followed by the star code and the phone
number. For example, press
h*675551001
.
A Marked System Speed Dial number can also begin with a star code.
To enter it, press
*
followed by the star code and the phone number.
For example, press
**675551001
.
Considerations
The Star Code Dial Delay is not inserted in manually dialed numbers.
If your Central Office provides the second dial tone immediately, you do not
need the delay provided by Star Code Dial Delay. In this case, choose the
0 setting to enable restriction checking but avoid the delay.
Valid Entries
0 = 0 Seconds Delay
✔
4 = 4 Seconds Delay
1 =1 Second Delay
5 = 5 Seconds Delay
2 =2 Seconds Delay
6 = Not Active
3 =3 Seconds Delay
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To change the Star Code Dial Delay setting:
1.
Press
f 0 0 s s # 4 1 0
at extension 10
or 11.
The current setting is displayed.
2.
Press the number on the dialpad for the setting you want (see “Valid Entries,”
above), or press
D
or
d
until the correct setting is displayed.
3.
To return to the default setting, press
r
.
4.
Select another procedure or exit programming mode.
5-164
Star Code Dial Delay (#410)
Содержание PARTNER Advanced Communications System Release 1.0
Страница 6: ...iv...
