Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To assign a name to an extension:
1.
Press
f
0
0
s
s
c
at extension 10
or 11.
2.
Enter the number of the extension to be programmed. For example, to
program extension 12, press
1
2
.
3.
Press left
i
. For extension 12, the display reads:
12 Enter Extension Name
If a name was assigned previously to this extension, that name displays instead.
4.
Enter the two-digit code for each character you want to enter. (See Table 5-1
for codes.) For example, to enter the name Andy, press
21
62
31
93
. The display reads:
12 ANDY
5.
If you make a mistake, you can press
!
to clear the display. Repeat
Step 4 to enter the correct name.
6.
Program a button for this extension or exit programming mode.
Extension Name Display
5-77
Содержание PARTNER Advanced Communications System Release 1.0
Страница 6: ...iv...
