Installation Tests
Local Equipment and Cross-connect Tests
...........................................................................................................................................................................................................................................................
4 - 1 9
Lucent Technologies - Proprietary
See notice on first page
365-372-327 R2.0
Issue 1, October 2003
addressing information within the
ent-crs-sts1
and
dlt-crs-sts1
commands.
When testing cabling for a Function Unit slot other than d, replace the
d
in each of the above addresses with the letter (
b
, or
g
) corresponding
to the Function Unit slot under test.
............................................................................................................................................................................
Step 28
Repeat this procedure for each Function Unit slot cabled to a DSX-3
via DS3/EC1 cabling.
............................................................................................................................................................................
Step 29
Check off the appropriate box in Appendix E, Installation Checklist.
...........................................................................................................................................................................
End of Steps
Tributary @ DSX-3
Addressing within
ent-crs-sts1
and
dlt-crs-sts1
2
*
* The LNW39 (DS1/DS3/16/3) circuit pack only supports 3 DS3’s
from the b function group
m-1-2,d-2
3
*
m-1-3,d-3
4
m-1-4,d-4
5
m-1-5,d-5
6
m-1-6,d-6
7
m-1-7,d-7
8
m-1-8,d-8
9
m-1-9,d-9
10
m-1-10,d-10
11
m-1-11,d-11
12
m-1-12,d-12