Chapter 6 Remote Configuration
Time Stamp.
6.2.1 Camera Configuration
Setting steps:
1. Enter into "Video Configuration "
"Camera" interface as shown below:
2.
Adjust Brightness, Contrast, Hue and saturation of the picture.
3.
Select white balance mode.
4.
Sharpen, denoise, frequency and CVBS format are adjustable.
5.
Enable the image mirror and image overturn function.
6.
Repair bad pixel by clicking ―Start Repair‖ button.
7.
Press the "Save" button to save the settings.
6.2.2 Video Stream
Enter into "Video configuration"
"Video Stream" to see an interface as shown below:
In this interface, you can set up the resolution, frame rate, bitrate type and video quality and
so on subject to the network bandwidth.
6.2.3 Time Stamp
Enter into "Video configuration"
"Time Stamp" to display the interface as shown below:
IP-CAMERA User Manual -
24